1. When purchasing a suspended floor, first look at the appearance, whether there are ****s, blistering, and poor plasticization. Then carefully observe whether there is burr on the front of the suspended floor, the thickness of the foot on the back of the removable interlock synthesis elastic double tier sport flooring is uniform and uniform, whether it is misplaced, and whether the overall rib position is symmetrical. Whether the pp material is filled evenly. There is no small hole in the surface, secondly, the color is seen, and the other is whether the color of the raw material is more vivid. Crystal clear, better finish and better use. The inferior assembled floor with added recycled materials is dull and dull.

2, good product flexibility and hardness coexist, the feel will be particularly good. If the product is too soft, it has flexibility. However, the rebound rate requirement of the ball is not satisfied. It is a product that does not have the functional requirements of sports venues. Although the ball's rebound rate is met. But because it is not flexible, it will be particularly brittle and easy to break. Especially in the winter when the temperature is extremely cold, the product is easily broken and affects the service life. In addition, some inferior counterfeit products can be directly destroyed. Products produced from low-quality, low-cost recycled materials are accompanied by an unpleasant smell. Such products have extremely poor weather resistance and affect the service life. The products produced by Shenzhen sc-zsfloor suspension assembled floor manufacturers are 100% pure raw materials, without any odor, and at the same time guarantee product quality. Flatness. Put two pieces of the same type of synthesis grass protection tiles together and touch the joints on the surface of the floor by hand. If there is no obvious unevenness, this product is a good product.

3. The main material of the suspended assembling sports floor is mainly modified PP, but there are many unscrupulous merchants on the market. In order to reduce the cost, talc or calcium carbonate is added to the PP material. These materials cannot be integrated into the material. In the molecular chain of PP. Therefore, it will greatly affect the service life of the product and will greatly reduce the sports performance of the floor. If you are holding a suspended assembly floor. It feels heavy on the hand. Then it can be determined that the synthesis grid unity sport flooring is added with a certain amount of talcum powder or stone powder. The specific method can be used to place the product into the bottom of the basin filled with water to observe its rising speed. Products with talc or stone powder are dense. Will sink to the bottom or float very slowly. From the selection of raw materials to the modification of PP, they are completed independently. The quality of the product is guaranteed from the source. The product is anti-aging, UV resistant, high temperature resistant and low temperature resistant. Increased product toughness while ensuring product strength. Guarantee the service life of the product.