Disassembly steps:
Opening the engine compartment cover, we can see the screws that fix the mid-net, remove the screws one by one, and place the screws. The screws on the left and right sides of the front bumper are fixed with the leaf plate lining. Generally, there are screws or buckles to fix them. Depending on the model, there may be differences.
There are also screws and buckles on the bottom to fix it, which is not easy to disassemble, because the vehicle's floor is relatively low, but you can squat down, you can touch the screw parts with your hands, and just remove them one by one. Separate the front bumper, hold the place where the front bumper and the leaf board are clamped together by hand, and then gently push outwards, and the left and right sides are opened. Pay attention when you are slow. Avoid the plastic clips inside. Off.
After the two sides are opened, the contact between the front bumper and the deflector needs to be separated, because the bottom is clamped on the deflector by the clips. You only need to gently push the front bumper outward with your hands. It is not easy to pay attention. After the front bumper is separated from the vehicle body, the plugs such as the fog lamp harness plugs on both sides need to be removed together. http://www.rollerlid.com