Biznas
»
Direct Support
»
Bell Canada Direct
»
Microstructural evolution of carbon fiberson mullite-corundum castables
Rank: Member
Groups: Registered
Joined: 12/3/2020(UTC) Posts: 27 Location: shanghai
|
Microstructural evolution of carbon fibers by silicon vapor deposition and its effect on mullite-corundum castables Carbon fibers (CFs) can be introduced to castables, due to the relative higher thermal conductivity and stronger damping properties. hsl abrasive In this research, microstructural evolution of carbon fibers (CFs) in the presence of mixture of silicon and silica powders under the protection of carbon black was studied in the temperature range of 1000–1300 °C by means of X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results show that some small amorphous SiOx globules were formed on the surface of CFs at the temperature below 1200 °C. With the increase of the treated temperature, the size of globules became bigger and reached maximum at 1200 °C. The growth of SiOx globules can be controlled by vapor-solid mechanism. In addition, the effects of these CFs on properties and microstructure of mullite-corundum castables were studied. The results showed that the CFs with SiOx globules (CFs/SiOX) could significantly improve the mechanical properties of the castables because the interfacial bonding strength between CFs/SiOx and matrix is much stronger than the untreated CFs. wholesale corundum
|
|
|
|
Biznas
»
Direct Support
»
Bell Canada Direct
»
Microstructural evolution of carbon fiberson mullite-corundum castables
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.