Introduction of the bioreactor fermenter :
bioreactor fermenter mainly consists of tank body,mixer,baffle plate,air distributor,cooling tube,manhole,integrated visual mirror and lamp etc.
bioreactor fermenter is used for mechanical mixing and fermentation of matters.This equipment adopts internal circulation to disperse and smarch air bubbles by mixing oar,fast dissolving oxygan,good in mixing effect.The tank body adopts SUS304 stainless steel.Inside the tank is equipped with automatic sprinkle-nozzle,to ensure production process conforms to GMP standard.
Structure of bioreactor fermenter :
Volume from 50L-20000L, could be customized according to customer needs.
Three layer structure: Inner body, jacket and insulated, insulated layer filled with insulation material.
Inner wall polish less 0.4um, Outside finish could be stain or mirror polish.
Conical bottom shape, cooling jacketed could adopt dimple jacketed, arched and corrugated access jacket.
Application of bioreactor fermenter
·Medicine
·biological
·Cosmetic
·Liquid Soap
·Commodity
·Chemical Shampoo
·Bath gel
·Pesticides
Filling volume65-80%
MaterialWetted parts are SS316L, and others is SS304.
Surface finishinside surface is 0.28-0.4μm by mechanical polish, ( passivation or electro-polish are optional )
outside surface is 0.4-0.8μm by satin finish.
PressureWorking pressure inside vessel:0.2mpa
Design pressure inside vessel: 0.25mpa
Working pressure inside jacket:0.3mpa
Design pressure inside jacket: 0.35mpa
Pressure can be also designed according to client’s detail requirement.
Agitation1.Fermentor use SEW decelerator
2.top mechanical agitator with two layer six blade impeller, one layer defoamer and four baffles.
3.mechanical seal (single or double mechanical seal)
4.speed range: 50-400rpm (it depends on the size of the vessel)
Equips of vessel1.using alcohol flame inoculation
2.sterile sampling vale and bottom valve
3.PH, DO, temp. sensor on lower side, side glass, top with foam and level probe, and 12v sight glass with lamp, etc.
ConstructionFloor-type
Three fermentor vessels or more than three ferementors with one control panel (simens PLC and HMI)
They can work independently and can work together at same time.
Operating panelChinese and English version
Main components and controls of system
PH1.On-line check and measure, and digitization fully automatic control;
2.PH, acid and base gang control. Peristaltic pump automatically adjust to feed acid and base;
3.Control range 2-12pH, measure precision±0.01 pH, control precision±0.1 pH;
4.It has auto alarm function.
5.pH sensor and signal transmission line, Mettler toledo
DO1.On-line check and measure, cascade with rpm; digital display.
2.Range 0-100% or 0-200%, precision ±1%;
3.It has auto alarm function;
4.DO sensor and signal transmission line, Mettler toledo
Foam control1.Automatically control and automatically alarm;
2. Stainless steel electrode check, peristaltic pump automatically add defoamer.
Feed control1. Automatically control and automatically alarm;
2.Stainless steel electrode check, peristaltic pump automatically feeding
Temp. control1.PID fully digitization signal processing, digitization control settings
2.Circulating water automatically control temperature
3.Measure range 0-150°C, control range 15-45°C,control precision±0.2°C
4.Pt 100Ωtemp. Sensor
5.system with electrical heater to control the temp inside vessel
6.water pump circulation
7.solenoid valve to control
Rotation speed1. Automatically control , with auto alarm function
2. Siemens frequency converter to adjust the speed.
Pressure1.Manually adjusting with pressure gauge and manual valve (standard system)
2.Automatically adjusting with pressure transmitter and PID valve and pneumatic valves (optional)
Air flow1.Manually adjusting with rotor meter and manual valve (standard system)
2.Automatically adjusting with mass-flow meter and pneumatic valves (optional)
3.Air in filter , tail gas filter , with PALL cartridge, precision 0.2μm
Sterilization1.It can be SIP by connecting with steam
2.Manually control with manual valve (standard one)
3.Automatic control with pneumatic valves (optional)
ControlSiemens PLC, and Siemens 10.4” LCD touch screen(HMI) and RITAI program
PC1.PC with Kingview software for recording function (optional)
2.PC with Siemens remote control and Kingview recording function (optional)
3.printer (optional)Fermenter manufacturer
website:http://www.kosuncn.com/bioreactor-and-fermenter/fermenter/