aaa replica watches Corum Bubble Halloween L082 / 03265 Replica watch
Brand Corum
Item Type corum bubble watch
Model L082 / 03265
Movement Automatic
Case Stainless Steel
Gender men
Case size 42 x 18.5 mm
Strap Rubber
Dial color black
Glass Sapphire
Boxes common box
Year 2017
Functions Hours / Minutes / Seconds
breitling navitimer replica There is a saying: When the chord process is over, if the escape wheel or the second wheel has the right amount of rotation, it means that the wheel train is good; I personally think that the second wheel has a maneuver, or the center structure, usually the center The transmission and the big box of the male watch are prone to maneuver. That is because the barrel wheel produces an inertia during the running of the string. When the clockwork is clean, it continues to rush forward, resulting in a clockwork. The core is deformed in reverse, which will result in a slight rebounding moment.The most important thing is that as long as the string is slightly twisted, the drive train will start to rotate. This action can keep at least the center wheel (two wheels) can rotate for one full week, and the nonstop running string is gently winding up;
Even if the running string is normal, it does not represent the movement of the movement after assembly. This is because when the spring is full, the radial clearance of all the wheels changes, especially the barrel wheel and In the second round, the closer to the motive part, the greater the pressure on the shaft. Such running strings can also verify the reliability of the clockwork of the clockwork at low energy, and it takes a lot of labor to change to a real walk.There are two cases of running strings: (1) pure state of the machine, (2) the movement has been loaded with the needle and assembled into the case. The second state is more important, because many watches only have problems when they are loaded into the case and the back cover is closed. The typical reason is that the movement table is not concentric with the case handle tube. Subject to some pressure, the splint is pressed and the part gap is lost.In particular, pay attention to the running string to find out whether the wheel train has periodic block, speed change, sudden and slow rotation or even stuttering. According to the gear ratio of the gear or their respective rotation cycles, it may be judged that there may be problems. The location of this is the purpose of doing the string.
richard mille rm11-03 Assembly problems can also be checked by running the strings, especially the gap between the hands, the gap between the hands and the dial or other marks, the gap between the second hand and the watch glass. For example, a watch, when running the string, found that its second hand always stops at the 35-45 position of the dial, the watch glass is slightly curved, and the watch is thinner, indicating that the tip of the second hand has reached the inside of the watch glass. Intense impact and vibration can distort the second hand, especially the thin and long second hand.The hands are mounted on the respective needle shafts. The verticality and radial clearance of the needle wheel can be clearly reflected by the height of the needle tip. The larger the length of the pointer, the more it looks like an amplifier, the old watch axle and the corresponding drill hole.
hyt skull watch 