Thin or Middle Thick or Thick Sheet Slitting Line Description
Slitting line machine is not only for the steel service sitting industry, but also for the pipe industry. A lot of customers make the pipes before slitting the large coil to the small size of coils. Slitting line can do uncoiling, slitting and recoiling works, make coil steel to any needed width coil steel. It mainly includes coil car, uncoiler, coil guide, slitting machine, scrap winder, tension unit, uncoiler and coil car, hydraulic system, etc. It mainly used in coil or hot rolled carbon steel, silicon steel and all the other kinds of metal materials with surface spreading.Specifications Component:
This thin sheet slitting line, also called metal coil slitter, is a kind of production line to break down master coils into smaller coils of a particular width. The thin sheet slitting line is composed of coil-loading car, single mandrel uncoiling, coil-end-feeding and shoveling, double roller pinching feeding, three-roller-leveling, end-cutting, strip-aligning, disk shearing, scrap reeling, hole accumulator, pre-separator, tensioning, recoiling ,coil down car, hydraulic control, and electric control.Detailed specifications:
Due to thickness of slitting sheet, the coil slitting line can be divided into thin sheet slitting line, middle thick coil slitting line and thick coil slitting line. Among them, the thin sheet slitting line: strip thickness: 0.2-1mm, 0.3-3mm or 0.3-1mm; strip width: 600mm,1000mm or 1600mm.Because of the thickness of slitting sheet, the coil slitting line can be divided into thin coil slitting line, middle thick sheet slitting line and thick coil slitting line. Among them, the middle thick sheet slitting line: strip thickness: (2-8) mm, (3-6) mm or (3-10) mm; strip width: 600-1600 mm, 600-1800mm or 600-2000mm.Due to the thickness of slitting sheet, the coil slitting line can be divided into thin coil slitting line, middle thick sheet slitting line and thick sheet slitting line. Among them, the thick sheet slitting line: strip thickness: (3-12) mm or (6-20) mm; strip width: 600-2000mm or 600-2200mm.Advantages: 1. This sheet slitting line is controlled by electrical controls system, a key to increasing yield; while the traditional one is adjusted by operators.2. Offline setup, push-button slitter tooling lock-up, powered indexing tension rolls, quick-change tooling bars and automatic transmissions are on all DC motors.3. All kinds of non-ferrous strips can be cut by cutting tools of different materials. The thin sheet slitting line can be divided into three types, due to the different slitting speed, max. coil weight, strip thickness and max. strip width.4. We offer tailor-made products, therefore regardless of specification or design we can make according to your requirements. http://www.rollformingchina.net...hick-sheet-slitting.html